Skip to content

Country

Jibb Öhlins Rolling Chassis - Raw

Regular price $6,483.00

local taxes may apply (learn more)

shipping calculated at checkout

Size and Color
Shock
Wheels
Spring Rate
Spring Rate
Seatpost Travel
Stem Length
Handlebar Rise

Low stock, order soon!

Jibb Öhlins Rolling Chassis - Color Raw

Our Jibb is the perfect companion for trail adventures, whether going uphill, downhill or all over the mountains. It combines the popular DNA of our Madonna with a playful and direct character that invites the rider to be an active part of the ride. But the Jibb will never leave you afraid of the roughest tracks and biggest features. It’s in for some party.

With the Rolling Chassis Kit we offer you a high-quality foundation for your individual Jibb build. You'll be ready to go in no time with the included component package yet still have plenty of room to create your own personal bike masterpiece – who wants an off the shelf build anyway?

We provide a 2023 Öhlins RXF36 m.2 fork with the frame, which you can combine with your preferred Öhlins or Fox shock at the rear. We also offer the Rolling Chassis with Fox suspension – click here for that.

Included is a OneUp Components V2 Dropper, with the choice of drop starting at 150 mm and going all the way up to 240 mm of travel, to provide the optimal setup for every rider. Their V3 handlebar remote is also included. If you need some help determining the amount of drop for you, click here.

For the cockpit, we rely again on OneUp Components and offer you the stem in two lengths of 42 mm or 50 mm and their carbon handlebar with either 20 mm or 35 mm rise, so you can feel comfortable from the get go. Ergon’s GD1 Evo Factory grips and SM-Enduro saddle round out the touch points. If you're unsure which combination of stem and bar is best for you, click here for more information on the perfect cockpit setup.

The Rolling Chassis can be topped off with the optional Newmen’s Evolution SL A.30 wheels, equipped with a Maxxis Assegai up front and a Maxxis Minion DHR II out back, both with EXO+ casing. This combination is our current go-to in almost all conditions. The wheels can be configured with either a Shimano Micro Spline or SRAM XD freehub. The Maxxis Tyres, rim tape and valves only come with the wheels, if you decide to order your rolling chassis without wheels, those components will not be included

To get you off to a good start in building your new bike, we've already pressed the headset cups into the frame and mounted the crown race on the fork. The tubeless tape and valves are also installed, you’ll just need to add in some sealant. The rest of the components are ready for you to assemble – this way you can truly experience the build process from the ground up and get to know your new bike and all its technical details. But you’re never on your own, as our support is always there if you need help building and can’t find the answer you’re after in our extensive knowledge base.

If you want to learn more about the Jibb, you can find all details on this page.

Geometry
S M L XL
Travel (R/F) r:135
f:150 (+10)
r:135
f:150 (+10)
r:135
f:150 (+10)
r:135
f:150 (+10)
Reach 420 445 470 495
Stack 608 622 636 649
Chain Stay Length 440 440 445 450
BB Drop 35 35 35 35
Seat Tube Length 395 420 445 470
Virtual Seat Tube Angle 77.5 77.5 77.5 77.5
Seat Tube BB Offset 35 35 35
35
Head Tube Angle 65.5 65.5 65.5 65.5
Wheelbase 1172 1203 1240 1276
Body Height in cm 158 - 170 167 - 180 177 - 190 186 - 199

(all dimensions in mm except for angles)

 

Frame Specifications

Travel rear/ front 135/ 150 (+10)
Wheel size 29” (740-755mm)
Max tire width 2.6” (66mm)
Tire clearance 84mm
Rear hub 148 x 12
Shifting One-by only, boost, 36t max
BB 73mm BSA / ISCG05
Brake 203mm Postmount
Seat tube diameter 31.6mm inside, 35mm outside
Internal seatpost routing Yes
Seatpost max insert S 205mm / M 230mm / L 255mm / XL 280mm
Headset 44 / 56 Zero stack
Cable routing All external
Tire to seat tube clearance 10 – 18mm (depending on size and tire)
Shock hardware Ball bearings and hardware included
Bearings main pivot 2 x 61808-2RS1 (52 x 40 x 7)
Bearings other pivots 10 x 91903-2RS1 (28 x 15 x 7)
Recommended fork dimensions ATC 560mm – Rake 44mm
Shock dimensions 185 x 55 – Trunnion
Material AL 6066 T6
Colours Matt Black and Raw with matt clear coat

Rolling Chassis Spec
Frame RAAW Jibb
Axle RAAW rear wheel axle
Seatpost Clamp RAAW
Headset Cane Creek Hellbender 70
Shock Öhlins TTX2 Air or Öhlins TTX22M Coil incl. spring
Fork Öhlins RXF36 m.2 Air, 150 mm, 44 mm offset
Dropper post OneUp V2 dropper post incl. V3 remote (black) and 22.2 HB clamp (150 mm, 180 mm, 210 mm or 240mm)
Stem OneUp 42mm or 50mm
Handlebar OneUp carbon handlebar, 20mm or 35mm rise
Grips Ergon GD1 Evo Factory, slim, frozen stealth/grey
Saddle Ergon SM Enduro Men M/L
Wheels Newmen Evolution SL A.30, 6-bolt, Micro Spline or XD freehub
Tire Front Maxxis Assegai, 29x2.50WT, EXO+, 3C MaxxGRIP
Tire Rear Maxxis Minion DHR II, 29x2.40WT, EXO+, 3C MaxxTerra
Tubeless Tubeless valves and tubeless rim tape (without sealant)
Gear Chainstay protector, down tube protector, seatstay protector, RAAW protective film, owners book
Contents

The Jibb Rolling Chassis is shipped in two separate parcels, one containing the frame and components and the other containing the wheels. This allows for a more efficient and secure delivery of the product.

Contents of the first parcel:

Jibb Frame Kit:

  • 1x RAAW Jibb frame 
  • 1x RAAW rear wheel axle
  • 1x RAAW seatpost clamp
  • 1x Jibb protective film kit
  • 1x Chainstay protector
  • 1x Seatstay protector
  • 1x Down Tube protector
  • 1x Brake mount 203mm
  • All hardware for shock assembly
  • 11x Zip ties
  • 1x Owners book
  • 1x Cane Creek Hellbender 70 headset

Rolling Chassis build:

  • 1x Öhlins RXF36 m.2 Air, 29” Boost wheel, 150 mm travel, 44 mm offset
  • 1x OneUp carbon handlebar, 800 mm wide, 35 mm clamp diameter, 8° back sweep, 5° up sweep, 20 mm or 35 mm rise
  • 1x OneUp stem, 42 mm or 50 mm
  • 1x OneUp V2 dropper post , V3 remote (black) with 22.2 HB clamp (150 mm, 180 mm, 210 mm or 240 mm drop)
  • 1x Ergon SM Enduro Men M/L saddle
  • 1x Set Ergon GD1 Evo Factory grips, slim, Frozen Stealth/Grey

If configured with wheels:

  • 1x Maxxis Assegai, 29x2.50WT, EXO+, 3C MaxxGRIP
  • 1x Maxxis Minion DHR II, 29x2.40WT, EXO+, 3C MaxxTerra

Shock choice:

  • 1x Öhlins TTX2 Air
  • 1x Öhlins TTX22M Coil incl. spring

Contents of the second parcel: (if configured with wheels)

  • 1x NEWMEN Evolution SL A.30 29" wheel, 15x110 hub width, 6-bolt rotor mount
  • 1x NEWMEN Evolution SL A.30 29" wheel, 12x148 hub width, 6-bolt, SRAM XD freehub or Shimano Micro Spline freehub, incl. tubeless rim tape (without sealant)
  • 2x Tubeless valves  

 

Geometry

S M L XL
Travel (R/F) r:135
f:150 (+10)
r:135
f:150 (+10)
r:135
f:150 (+10)
r:135
f:150 (+10)
Reach 420 445 470 495
Stack 608 622 636 649
Chain Stay Length 440 440 445 450
BB Drop 35 35 35 35
Seat Tube Length 395 420 445 470
Virtual Seat Tube Angle 77.5 77.5 77.5 77.5
Seat Tube BB Offset 35 35 35
35
Head Tube Angle 65.5 65.5 65.5 65.5
Wheelbase 1172 1203 1240 1276
Body Height in cm 158 - 170 167 - 180 177 - 190 186 - 199

(all dimensions in mm except for angles)

 

Frame Specifications

Travel rear/ front 135/ 150 (+10)
Wheel size 29” (740-755mm)
Max tire width 2.6” (66mm)
Tire clearance 84mm
Rear hub 148 x 12
Shifting One-by only, boost, 36t max
BB 73mm BSA / ISCG05
Brake 203mm Postmount
Seat tube diameter 31.6mm inside, 35mm outside
Internal seatpost routing Yes
Seatpost max insert S 205mm / M 230mm / L 255mm / XL 280mm
Headset 44 / 56 Zero stack
Cable routing All external
Tire to seat tube clearance 10 – 18mm (depending on size and tire)
Shock hardware Ball bearings and hardware included
Bearings main pivot 2 x 61808-2RS1 (52 x 40 x 7)
Bearings other pivots 10 x 91903-2RS1 (28 x 15 x 7)
Recommended fork dimensions ATC 560mm – Rake 44mm
Shock dimensions 185 x 55 – Trunnion
Material AL 6066 T6
Colours Matt Black and Raw with matt clear coat

Rolling Chassis Specifications

Frame RAAW Jibb
Axle RAAW rear wheel axle
Seatpost Clamp RAAW
Headset Cane Creek Hellbender 70
Shock Öhlins TTX2Air, Öhlins TTX22M, Fox Float X Factory, Fox Float X2 Factory, Fox DHX2 Factory or 2021 Fox DPX2 Factory
Fork Öhlins RXF36 m.2 Air, 150 mm, 44 mm offset
Dropper post OneUp V2 dropper post incl. V3 remote (black) and 22.2 HB clamp (150 mm, 180 mm, 210 mm or 240mm)
Stem OneUp 42mm or 50mm
Handlebar OneUp carbon handlebar, 20mm or 35mm rise
Grips Ergon GD1 Evo Factory, slim, frozen stealth/grey
Saddle Ergon SM Enduro Men M/L
Wheels Newmen Evolution SL A.30, 6-bolt, Micro Spline or XD freehub
Tire Front Maxxis Assegai, 29x2.50WT, EXO+, 3C MaxxGRIP
Tire Rear Maxxis Minion DHR II, 29x2.40WT, EXO+, 3C MaxxTerra
Tubeless Tubeless valves and tubeless rim tape (without sealant)
Gear Chainstay protector, down tube protector, seatstay protector, RAAW protective film, owners book

Contents

The Jibb Rolling Chassis is shipped in two separate parcels, one containing the frame and components and the other containing the wheels. This allows for a more efficient and secure delivery of the product.

Contents of the first parcel:

Jibb Frame Kit:

  • 1x RAAW Jibb frame 
  • 1x RAAW rear wheel axle
  • 1x RAAW seatpost clamp
  • 1x Jibb protective film kit
  • 1x Chainstay protector
  • 1x Seatstay protector
  • 1x Down Tube protector
  • 1x Brake mount 203mm
  • All hardware for shock assembly
  • 11x Zip ties
  • 1x Owners book
  • 1x Cane Creek Hellbender 70 headset

Rolling Chassis build:

  • 1x Öhlins RXF36 m.2 Air, 29” Boost wheel, 150 mm travel, 44 mm offset
  • 1x OneUp carbon handlebar, 800 mm wide, 35 mm clamp diameter, 8° back sweep, 5° up sweep, 20 mm or 35 mm rise
  • 1x OneUp stem, 42 mm or 50 mm
  • 1x OneUp V2 dropper post , V3 remote (black) with 22.2 HB clamp (150 mm, 180 mm, 210 mm or 240 mm drop)
  • 1x Ergon SM Enduro Men M/L saddle
  • 1x Set Ergon GD1 Evo Factory grips, slim, Frozen Stealth/Grey

If configured with wheels:

  • 1x Maxxis Assegai, 29x2.50WT, EXO+, 3C MaxxGRIP
  • 1x Maxxis Minion DHR II, 29x2.40WT, EXO+, 3C MaxxTerra

Shock choice:

  • 1x Öhlins TTX2 Air
  • 1x Öhlins TTX22M Coil incl. spring
  • 1x 2021 Fox DPX2 Factory
  • 1x Fox Float X Factory, 2pos lever
  • 1x Fox Float X2 Factory, 2pos lever 
  • 1x Fox DHX2 Factory, 2pos lever, incl. Fox SLS spring

Contents of the second parcel: (if configured with wheels)

  • 1x NEWMEN Evolution SL A.30 29" wheel, 15x110 hub width, 6-bolt rotor mount
  • 1x NEWMEN Evolution SL A.30 29" wheel, 12x148 hub width, 6-bolt, SRAM XD freehub or Shimano Micro Spline freehub, incl. tubeless rim tape (without sealant)
  • 2x Tubeless valves  

Reviews (1)

Customer Reviews

Based on 1 review Write a review