Madonna V2.2 Fox Factory Rolling Chassis - Black

Madonna V2.2 Fox Factory Rolling Chassis - Color Black

Six years ago, the original Madonna started the story of RAAW. Since then, it’s impressed riders and racers all over the world. Developed for the fastest and toughest trails that you can throw it down, the Madonna not only excels with its balanced feel and consistently predictable behavior, but also with its excellent climbing manners and maintenance-friendly and durable design. 

With the Rolling Chassis Kit we offer you a high-quality foundation for your individual Madonna build. You'll be ready to go in no time with the included component package yet still have plenty of room to create your own personal bike masterpiece – who wants an off the shelf build anyway?

We provide a 2023 Fox 38 Factory fork with the frame, which you can combine with your preferred Fox or Öhlins shock at the rear. We also offer the Rolling Chassis with Öhlins suspension – click here for that.

Included is a OneUp Components V2 Dropper, with the choice of drop starting at 150 mm and going all the way up to 240 mm of travel, to provide the optimal setup for every rider. Their V3 handlebar remote is also included. If you need some help determining the amount of drop for you, click here.

For the cockpit, we rely again on OneUp Components and offer you the stem in two lengths of 42 mm or 50 mm and their carbon handlebar with either 20 mm or 35 mm rise, so you can feel comfortable from the get go. Ergon’s GD1 Evo Factory grips and SM-Enduro saddle round out the touch points. If you're unsure which combination of stem and bar is best for you, click here for more information on the perfect cockpit setup.

The Rolling Chassis is topped off with Newmen’s Evolution SL EG.30 wheels, equipped with a Maxxis Assegai with EXO+ casing up front and a Maxxis Minion DHR II with DD casing out back. This combination is our current go-to in almost all conditions. The wheels can be configured with either a Shimano Micro Spline or SRAM XD freehub.

To get you off to a good start in building your new bike, we've already pressed the headset cups into the frame and mounted the crown race on the fork. The tubeless tape and valves are also installed, you’ll just need to add in some sealant. The rest of the components are ready for you to assemble – this way you can truly experience the build process from the ground up and get to know your new bike and all its technical details. But you’re never on your own, as our support is always there if you need help building and can’t find the answer you’re after in our extensive knowledge base.

The frames are regularly available with the rocker link options shown in the selection on the side. If you prefer a different rocker link, please send us an e-mail to hello@raawmtb.com and we will check the availability of the preferred configuration. 

Geometry

(all dimensions in mm except for angles)

Frame Specifications

Travel rear / front 160mm / 170mm
Wheel size 29” (740-755mm)
Max tire width 2.6” (66mm)
Tire clearance 84mm
Rear hub 148 x 12
Shifting One-by only, boost, 36t max
BB 73mm BSA / ISCG05
Brake 203mm Postmount
Seat tube diameter 31.6mm inside, 35mm outside
Internal seatpost routing Yes
Seatpost max insert S 200mm / M 225mm / L 250mm / XL 275mm
Headset 44 / 56 Zero stack
Cable routing All external
Tire to seat tube clearance 10 – 18mm (depending on size and tire)
Shock hardware Ball bearings and hardware included
Bearings main pivot 2 x 61808-2RS1 (52 x 40 x 7)
Bearings other pivots 10 x 91903-2RS1 (28 x 15 x 7)
Recommended fork dimensions ATC 580mm (S 570mm) – Rake 44mm
Shock dimensions 205 x 60 or 205 x 65 – Trunnion
Material AL 6066 T6
Colours Matt Black and raw with matt clear coat

Rolling Chassis Spec

Contents

The Madonna Rolling Chassis is shipped in two separate parcels, one containing the frame and components and the other containing the wheels. This allows for a more efficient and secure delivery of the product.

Contents of the first parcel:

Madonna V2.2 Frame Kit

• 1x RAAW Madonna V2.2 frame 
• 1x RAAW rear wheel axle
• 1x RAAW seatpost clamp
• 1x Madonna protective film kit
• 1x Chainstay protector
• 1x Seatstay protector
• 1x Down Tube protector
• 1x Brake mount 203mm
• All hardware for shock assembly
• 11x Zip ties
• 1x Owners book
• 1x Cane Creek Hellbender 70 headset

Rolling Chassis build:

• 1x Fox 38 Factory, 29” Boost wheel, 170 mm travel, Grip2 damper, 44 mm offset, 15QR axle, matte black with orange/matte black logo
• 1x OneUp carbon handlebar, 800 mm wide, 35 mm clamp diameter, 8° back sweep, 5° up sweep, 20 mm or 35 mm rise
• 1x OneUp stem, 42 mm or 50 mm
• 1x OneUp V2 dropper post , V3 remote (black) with 22.2 HB clamp (150 mm, 180 mm, 210 mm or 240 mm drop)
• 1x Ergon SM Enduro Men M/L saddle
• 1x Set Ergon GD1 Evo grips, slim, Frozen Stealth/Grey
• 1x Maxxis Assegai, 29x2.50WT, EXO+, 3C MaxxGRIP
• 1x Maxxis Minion DHR II, 29x2.40WT, DD, 3C MaxxTERRA

Optional shock choice:

• 1x Fox Float X2 Factory, 2pos lever
• 1x Fox DHX2 Factory, 2pos lever, incl. Fox SLS spring

Contents of the second parcel:

• 1x NEWMEN Evolution SL EG.30 29" wheel, 15x110 hub width, 6-bolt rotor mount
• 1x NEWMEN Evolution SL EG.30 29" wheel, 12x148 hub width, 6-bolt rotor mount, SRAM XD freehub or Shimano Micro Spline freehub, incl. tubeless rim tape (without sealant)
• 2x Tubeless valves