Skip to content

Madonna V3.2 Fox Podium Build

Sale price £6,446.00

local taxes may apply (learn more)

shipping calculated at checkout

Finish
Size and Rocker
Tuned Shock
Spring Rate
Seatpost Travel
Stem Length
Handlebar Rise
Protective film

Out of stock

Built to Last - Backed by RAAW

  • 5-Year Warranty
  • Double Sealed Bearings
  • Factory Grade Support
  • Advanced Setup Guides

Madonna V3.2 Fox Podium Build

This rolling chassis now ships with the updated Madonna V3.2 frame. The pictures still show the frame with the previous dropouts.

The Fox Podium upside-down fork is the centerpiece of this Madonna build, the brand new fork with MX vibes, a big crown and leg guards, not only looks the part, but its hard-charging position next to Fox’ already dominant 38 makes it a perfect fit to the Madonna, sharing the same intentions.

Also completely new are the XTR Di2 drivetrain and brakes. The wireless electronic shifting and 4-piston brakes are the new benchmark for a Madonna and the short cranks are a great addition to our low BB.

Madonna Fox Podium builds come with the Fox shock of your choice and the silver Newmen Beskar 30 rims. These are paired with the tried and true Maxxis Assegai DHRII tyre combination, and we finish off the bike with OneUp and Ergon components for the cockpit, dropper and saddle.

If you want to learn more about the shock choice or the two different rocker link options, you can find all details about the Madonna on this page.

To get you off to a good start in building your new bike, we've already pressed the headset cups into the frame, mounted the crown race on the fork and cut the steerer tube to length. The tubeless tape and valves are also installed, you’ll just need to add in some sealant. The rest of the components are ready for you to assemble – this way you can truly experience the build process from the ground up and get to know your new bike and all its technical details. But you’re never on your own, as our support is always there if you need help building and can’t find the answer you’re after in our extensive knowledge base.

The frames are regularly available with the rocker link options shown in the selection on the side. If you prefer a different rocker link, please send us an e-mail to hello@raawmtb.com and we will check the availability of the preferred configuration. 

In case you want to pick the bike up, we can fully assemble it. Please reach out to us so that we can prepare everything in time. 

Geometry

S M L XL XXL
Reach 430 455 480 505 530
Stack 637 650 664 677 677
Chainstay Length 445 445 450 455 455
BB Drop 35 35 35 35 35
Seat Tube Length 395 420 445 470 470
Virtual Seat Tube Angle 77 77 78 78 78
Head Tube Angle 64 64 64 64 64
Wheelbase 1216 1248 1284 1320 1346
Body Height in cm 158 - 170 167 - 180 177 - 190 186 - 199 195 - 208

(all dimensions in mm except for angles)

Fox Podium Build Specifications

Frame RAAW Madonna V3.2

Seatpost Clamp RAAW

Headset Cane Creek Hellbender 70

Shock Fox Float X Factory, Fox Float X2 Factory or Fox DHX2 Factory - MY26

Fork Fox Podium Factory 170, Grip X2, 20TAx110, 44mm Rake

Dropper Post OneUp V3 dropper post incl. V3 remote (black) and I-Spec EV adapter (150 mm, 180 mm, 210 mm or 240mm)

Stem OneUp 42mm or 50mm

Handlebar OneUp V2 carbon handlebar, 20mm or 35mm rise

Grips Ergon GDH Stealth

Saddle SM Enduro Pro Titanium Men M/L

Brakes Shimano XTR BL-M9220 Enduro

Discs (r/f) XTR Enduro /Trail 200 (203mm)RT-MT905L

BB SM-BB93 Innenlager MTB

Crank Shimano XTR FC-M9220 – Trail/Enduro Crank165mm

Chainring Shimano XTR SM-CRM96 32T 32t

Derailleur Shimano XTR DI2 RD-M9250 SGS 12 sp 10-51T

Shifter Shimano XTR SW-M9250IR – Di2 Shifter, I-Spec EV 

Cassette XTR CS-M9200 10-51T

Chain XTR CN-M9100

Wheels Newmen Beskar 30 strong 29" 32h FADE SP 6B 15-20x110, 12x148 MS silver

Tire Front Maxxis Assegai, 29x2.50WT, EXO+, 3C MaxxGRIP

Tire Rear Maxxis Minion DHR II, 29x2.40WT, DD, 3C MaxxTERRA

Tubeless Tubeless valves and tubeless rim tape (without sealant)

Gear Chainstay protector, down tube protector, seatstay protector, RAAW protective film, owners book, Shimano Di2 battery and charger 

Frame Specifications

Travel rear / front 160 / 170mm

Wheel size 29” (740–755mm) (27,5” rear option)

Max tyre width 2.6” (66mm)

Tyre clearance 84mm

Rear hub 148*12

Shifting One-by only, boost, 36t max (UDH / T-Type option)

BB 73mm BSA / ISCG05

Brake 203mm post mount

Seat tube diameter 31.6mm inside, 35mm outside

Internal seatpost routing Yes

Seatpost max insert S 220mm / M 245mm / L 268mm / XL & XXL 294mm

Headset 56 / 56 Zero stack

Cable routing All external

Shock hardware Ball bearings and hardware included

Bearings main pivot 2 x 6906-2RS1 (47*30*9)

Bearings rocker pivot 2 x 6002-2RS1 (32*15*9)

Bearings other pivots 8 x 6902-2RS1 (28*15*7)

Recommended fork dimensions ATC 587,7mm – Offset 44mm

Shock dimensions 205*65 / 205*60 – Trunnion

Weight 3.9 kg (incl. all hardware, w/o shock, size M)

Material AL 6066 T6

Finish options Matt black and raw with matt clear coat

Contents

The Madonna Fox Podium Build is shipped in two separate parcels, one containing the frame and components and the other containing the wheels. This allows for a more efficient and secure delivery of the product. The fork will be mounted in the frame and the other parts will be ready for you to get started with the build.

Contents of the first parcel:

Madonna V3.2 Frame Kit

  • 1x RAAW Madonna V3.2 frame 
  • 1x RAAW seatpost clamp
  • 1x Madonna protective film (if selected)
  • 1x Chainstay protector
  • 1x Seatstay protector
  • 1x Down Tube protector
  • 1x Brake mount 203mm
  • All hardware for shock assembly
  • Nine Zip ties
  • 1x Owners book
  • 1x Welcome package
  • 1x Cane Creek Hellbender 70 headset

Fox Podium Build:

  • 1x Fox Podium Factory GRIP X2, 29”/44/170mm
  • 1x OneUp carbon handlebar, 800 mm wide, 35 mm clamp diameter, 8° back sweep, 5° up sweep, 20 mm or 35 mm rise
  • 1x OneUp stem, 42 mm or 50 mm
  • 1x OneUp V3 dropper post , V3 remote (black) with 22.2 HB clamp (150 mm, 180 mm, 210 mm or 240 mm drop)
  • 1x Ergon SM Enduro Pro Titanium Men M/L
  • 1x Set Ergon GDH Team
  • 1x Shimano XTR BL-M9220 Brake Set + RT-MT905L 203mm Rotors
  • 1x Shimano XTR FC-M9220 Crank Set 32t 165mm incl. SM-BB93 Bottom Bracket
  • 1x Shimano XTR RD-M9250 SGS 12 sp 10-51T
  • 1x Shimano XTR SW-M9250IR – Di2 Shifter, I-Spec EV 
  • 1x Shimano XTR CS-M9200 10-51T Cassette + XTR CN-M9100 Chain
  • 1x Shimano BT-DN320 Battery + EC-DN100 Charger
  • 1x Maxxis Assegai, 2.50WT, EXO+, 3C MaxxGRIP
  • 1x Maxxis Minion DHR II, 2.40WT, DD, 3C MaxxTERRA

Shock choice:

  • 1x Fox Float X Factory, 2pos lever
  • 1x Fox Float X2 Factory MY26, 2pos lever
  • 1x Fox DHX2 Factory MY26, 2pos lever, incl. Fox SLS spring

Contents of the second parcel:

  • 1x Newmen Beskar 30 Silver Enduro Wheelset
  • 29" 20x110 and 12x148 hub width, 6-bolt rotor mount
  • Shimano Microspline freehub
  • incl. tubeless rim tape (without sealant)
  • incl. 2x tubeless valves  
Loading image:
Factory Grade Support Included

If you ride a RAAW, you'll never ride alone. Your frame comes with comprehensive documentation and a direct line to the team that created it.

We're happy to answer all your questions!

  • Travel rear/front160 / 170 mm
  • Wheel size29” (740–755 mm) (27,5” rear option)
  • Max tyre width2.6” (66 mm)
  • Rear hub148*12
  • ShiftingOne-by only, boost, 36t max (UDH / T-Type compatible)
  • BB73 mm BSA / ISCG05
  • Brake200 +3 mm post mount
  • Seat tube diameter31.6 mm inside, 35 mm outside
  • Internal seatpost routingYes
  • Seatpost max insertS 220 mm / M 245 mm / L 268 mm / XL & XXL 294 mm
  • Headset56 / 56 Zero stack
  • Cable routingAll external
  • Shock hardwareBall bearings and hardware included
  • Bearings main pivot2 x 6906-2RS1 (47*30*9)
  • Bearings rocker pivot2 x 6002-2RS1 (32*15*9)
  • Bearings other pivots8 x 6902-2RS1 (28*15*7)
  • Recommended fork dimensionsATC 587,7 mm – Offset 44 mm
  • Shock dimensions205*65 / 205*60 – Trunnion
  • Weight3.9 kg (incl. all hardware, w/o shock, size M)
  • MaterialAL 6066 T6
  • Finish optionsMatt black and raw with matt clear coat
  • 5 stars: 134 (94%)
  • 4 stars: 7 (5%)
  • 3 stars: 1 (1%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
This product has no reviews of its own. The merchant grouped it with related products, so the reviews shown are from across that group.
I
Ingo K.
Super Happy

Super Happy bin ich nach den ersten 2 Monaten mit dem Bike und freue mich aber jetzt schon riesig darauf, mit all den verschiedenen Einstellmöglichkeiten herumzuspielen.
Den "Koffer" würde ich im kommenden Frühjahr gerne nutzen 😉.
Bis dahin geht es einfach weiter auf Entdeckungstour

M
MoKlein
Für die Ewigkeit gebaut

Ich bin ein großer Fan von Raaw und dem Madonna, ein Fahrrad für alles was kommt, egal obs uphill ist oder schnelle DH Tracks, klar ist es kein Downhiller aber es arbeitet unter einem so gut das man denkt da kann nichts schief gehen.
Lieb das Ding

M
Mitzi
Madonna V3.2 XL

Das Madonna V3.2 war mein erster Bike Build und hier hat echt alles zusammen gepasst.

Angefangen vom großartigem Kundensupport, der mich bei der Auswahl der Rahmengröße unterstützt hat. Geworden ist es dann der XL Rahmen mit dem 65er Rocker (198cm und ca. 100kg)

Bis hin zum Aufbau des gesamten Bikes. Hier war die Knowledge Base und die YT Videos echt mega hilfreich.
Mit all den zur Verfügung gestellten Daten war auch die Komponenten Auswahl äußerst einfach.

Optisch ist das Madonna V3.2 echt ein Wahnsinn. Ich mein, schaut es euch doch einfach an!!

Grundsätzlich muss ich auch sagen, dass ich auf der Suche nach genau einem solchen Konzept war. Long Travel Enduro mit Alu Rahmen, zuverlässig und leicht daran zu Schrauben. Und dazu dann noch diese Geo-Werte.

Erste Enduro Runde hat mich auch gleich begeistert.
Uphill war vollkommen ok, tut was es soll. Seitens Sattel- und Lenker Position heißt es für mich noch ein wenig nachschärfen.
Im Downhill hat das Bike dann völlig überzeugt. Mega Stabil und Laufruhig, bügelt über alles drüber und vermittelt extremes Selbstvertrauen.

Bin wirklich zufrieden.

L
Luka K.

I bought the frame set without the shock, in size L and with 60 rocker (I'm about 186 cm tall and weigh about 78 kg). I built the bike mostly with parts from my old enduro bike, which included an OEM Rockshox SDLX with unknown tune, but it worked just fine.

Bike is just amazing. Frame looks even nicer in person than on the pictures. Geometry felt a little bit strange when riding for the first time (especially since my old enduro bike had a little bit outdated geo) - long wheelbase, low BB, high stack, but it really started to make sense as soon as bike was pointed downward on a steep and fast section. In just a couple of rides I already smashed my PRs (on tracks I ride quite often).

Fully built bike is a little bit on the heavier side - about 17.5 kg, compared to 15.5 kg on my old carbon enduro bike. However, I don't think it makes any difference. I mostly felt the weight difference only on paved straights, but when climbing, it is pretty much the same. I never felt the climb would tire me any more than with the old bike. The main limiting factor on how long I would riding go was still the access to water, and not the actual elevation gain or distance.

In the world where bikes start to have headset routed cables, it is a real refreshment to see full external routing - I'm currently testing different options for brakes and it makes a life a lot easier.

I am very satisfied with the bike and look forward to ride it in many years to come.

N
Nils W.
Madona V3.2 XXL | do-it-all bike for a tall rider

Before talking about the bike itself, I think it's important to explain what I was looking for in a mountain bike, because that heavily influenced my decision. I'm 200 cm tall, so I need a quite long bike to feel centered and have enough room to move around. At around 95 kg in full riding gear, durability was also a major priority. Since my arms are a bit more on the short side for my height, I generally prefer a higher cockpit setup to stay comfortable and maintain a balanced riding position. I also do all the maintenance and repairs on my bikes myself. I enjoy working on them, and as a bit of a bike nerd, I love experimenting with different components and settings. That made ease of maintenance another important factor when choosing a frame. Finally, I only own one mountain bike, so it has to do everything. It needs to pedal efficiently on long climbs, be fun on my not-so-hard home trails, and still feel capable during the occasional bike park day.

After discovering RAAW online, I had the chance to test ride their Madonna V3 in XXL at the Bike Festival Freiburg 2026. I can highly recommend test riding any bike before buying it, since there are some things about a bike you cannot get from paper. The first thing Felix and I (who did a great job assisting my test ride) noticed was that the front could be even higher for me. Even though the cockpit and suspension weren't perfectly set up for me during the test ride, I immediately enjoyed how the bike handled. It also became clear that the XXL Jibb LT would still be a little too small for me, while the Madonna felt like the better platform. The test ride showed me that I wanted to keep the bike's balanced handling while raising the front end slightly. Because of that, I decided to order the long chainstay dropouts from the start. I contacted RAAW by email to ask whether they could offer the frame with the long dropouts already installed, saving me from buying two different sets. They were kind enough to accommodate my request. In the end, I ordered an XXL Madonna V3.2 frame with the long chainstay dropouts and the headset, without a shock. The ordering process was smooth, payment and shipping were straightforward, and the frame arrived timely, perfectly packaged, and in flawless condition.

For the build, I chose a Fox Float X2 Performance Elite air shock and paired it with a RockShox ZEB Select fork. I may upgrade the fork to a Charger 3 damper in the future, but for now it performs ok.

I installed a OneUp 240 mm dropper post and a 35 mm stem with a 50 mm rise handlebar and 20 mm of spacers underneath the stem. This gives me the higher front end I was aiming for and suits my body proportions very well. The rest of the build consists of a mix of parts from my previous bike and components I already had available, including the wheels, Shimano drivetrain, and brakes. Building the bike was refreshingly straightforward. Everything is intuitive, and whenever I had a question, the excellent handbook provided all the information I needed. It's clear that someone considered serviceability during the frame's design.

The end result is a bike that fits my rather unusual proportions exceptionally well. Despite weighing about 17.5 kg with pedals and bottle cage, it pedals surprisingly efficiently. The front-to-rear balance feels great for me, and although the wheelbase is very long, the bike still corners quite good. Most importantly, this is the most confidence-inspiring bike I've ridden so far. It encourages me to ride faster and tackle more difficult terrain while still feeling composed and predictable. Since I bought the bike in early summer, I haven't yet put it through a full winter of mud and bad weather. The real durability test is therefore still to come, but based on build quality and my experience so far, I'm optimistic that it will perform well in the long term.

D
Dennis S.

Dass perfekte Bike! Mit Bedacht um den Rest der Komponenten am Madonna, baut man sich ein Bike für die Ewigkeit.

K
Klaus H.

Laufruhig, schnell und wendig. Bin zufrieden mit dem Bike!

C
Christian C.

After recently owning three carbon bikes and having epoxy issues with my last two (got them warrantied, but it's a hassle to deal with), I have decided to try something different, going back to the roots of mountain bike history and aiming for durability.

Although weighing 18kg and probably being the heaviest bike I've owned in the last decade, it's so comfortable, quiet, and planted that I forgive it for that. I'm actually using the Madonna for everything, from list assist day long rides to pedal enduro laps and XC rides with my dog. Despite the long travel, this is a do-it-all bike!

J
Jörg
Erstes Bike von Raaw

Das Madonna war echt easy und cool aufzubauen. Einfach nur Mega .

A
ALAN M.

Been riding Raaw Madonna’s for 5 and a half years, I didn’t consider any other frame when I upgraded to V3 2 months ago, best bikes ever!!

A
Andy

Das ist mein erstes RAAW. Easy build. Nach der ersten Probefahrt im Schnee ein super Bike.

L
L.M.
Good so far

182cm height on a size large, full 29, rocker 60, 42mm stem, 35mm rise bars, fox 38/float X2 ‘26. Fit is very comfortable both seated and standing. Coming from a 2022 firebird 29, which feels more lively and willing to get in the air than the V3, as well as feeling like a generally faster bike downhill. Cornering is where the two bikes feel quite different with the V3 calmly and safely able to break traction and drift both wheels with less sensitivity to body position, while the pivot requires a more specific rider position to prevent losing front end grip. Not surprisingly, the V3 also feels like the preferred bike in steeper and faster terrain. I am a high stack believer at this point. The rear center length has been a welcomed change too from the firebird and despite being 17mm longer, the instances of noticing it in a negative way have been virtually nonexistent. A 450 rear and long WB can still get through tight corners just fine with some mild body position changes. The V3 is dead quiet while descending and very muted feeling. The ‘26 X2 has way more mid stroke support and noticeable changes with each click than outgoing models. After burnishing the 38’s lower bushings I’ll also say the Grip X2 (vs Grip2) shares the same supportive characteristics as the new shock, which for me as a lighter rider than some isn’t always of benefit. With 165mm cranks and a 30T ring I spend most of my climbs in the largest cog. The bike is not sluggish at all, it just weighs more than what I’m used to at ~42lbs with pedals (not including tube, bottle, OneUp tool). I had some minor shipping issues after ordering and RAAW’s team was really great to work with. The bike seems very well thought out and durable so far.

C
Colin P.
What an awesome bike

So much confidence inspiring in the downhill. It also climb very well and got you covered for those longs climbing days !
It also looks very awesome

T
Tomas
Proud owner

I am not a professional, just found passion of riding MTB in my late 30s. I own few bikes like Voodo, Mondraker ebike, Ghost riot, but I am lucky to find RAAW Madonna and add it to my collection. None of previous bikes gave me confidence or feeling that this is the right bike for me. But RAAW Madonna took me to some good places and improved my skills and confidence. I am from UK (unfortunate Brexit logistics country) but that did not stop me buying from RAAW. Customer support was amazing, service was amazing, shipping was amazing, UK customs was a little bit amazing as I needed to fait few extra days. But now, I al riding RAAW in UK, where not many people know this brand, only professionals or technicians! As they all complimenting my choice. I highly recommend buying, even if you will need to deal with UK customs. That was smooth process.

J
J B.
Thank you RAAW!

What a bike!

I've been riding the bike this season and it's been a blast. Riding bike parks, trail parks and local trails, all with ease. Both uphill and of course down hill. Coming from a full carbon enduro bike with great specs I was a bit sceptic about the weight but the pedal efficiency is really great, less fatigue with this one compared with my previous one.

I've also gained lots of confidence in the bike park again thanks to this bike, both in steeper and rougher sections but also in the jumps.

Maintenance vice, I've basically only cleaned it and lubed the chain, still as quiet as new.

Overall a great bike that really does what RAAW and every review says!

Community Builds

See how riders build and set up this model. Want to share yours? Submit your build.

Back to top