Rear Derailleur Hanger - UDH

Leider immer wieder die Schwachstelle, sofern man keine UDH fährt.
Reist mir regelmäßig ab und deshalb wird immer ausreichend nachbestellt 😅

Bought a few more because so far each one has failed at the same point in the same way. They have a significant cutout that allows them to bend surprisingly easily, and a sharp change in cross section where fracture initiates.
Currently using the 308 SS version - it also yields easily but hopefully it’s less prone to fatigue. If it too does fail, I have a few more of these 7075 hangers to keep the bike in service.
I’ve had my V2.2 Madonna for five years and still love it. But it does consume derailleur hangers, more than any other bike I’ve known.

Bei jeder Tour im Rucksack dabei. Hat mir schon das ein oder andere Schaltwerk gerettet.

Wie immer bin ich vom perfekten Service begeistert 🤩 und freue mich, schnell mal vor Ort vorbeikommen zu können.
Schaltauge hat die gewohnt gute Qualität 👍🏻

War aber auch nur ein Ausfallende 😉

Broke my last one after romantic kiss with a stone, these ones seems stiffer.

Very good hanger , the original got broke after 16 month.
This one it's more stiff .
I recommend

Never faced an issue with the 7075

Stock Hanger works fine with mechanical SRAM GX, but too soft for AXS. Steel hanger works flawless.

Tried out all 3 versions of the hanger including the steel one. They all havben't snaped off but they where all bent after the first or second ride... I run sram axs

Hi,

for me the regular hanger works as it should. No trouble for my 11spd derailleur.

I bent one hanger slightly in a crash where I landed my bike on a root with the derailleur first. The hanger "saved" my rear derailleur through deforming. I could even bend the hanger back without destroying it and ride the rest of the day, with 95% good shifting.

I´ve since replaced it, for peace of mind. I've had trouble with derailleur alignment on two different bikes with Sram 12spd Eagle straight from the factory (Orbea and YT).

Agree with other review. Just ordered the 7075 hanger - hopefully it is a bit stiffer. The stock was so soft I couldn’t run an AXS derailleur because the hanger would bend just under the dynamic weight of the derailleur at big impacts. Had to straighten every ride til it snapped. I’ll update once I get the new one on

The 6066 hanger is the achilles heel of the Madonna. I sometimes feel as though if I look at rocks the hanger bends out of alignment. I often have to re-align it after every other ride and I don't even know what rocks I tagged. If I happen to low-side to the right, there is a 100% chance that hanger will be bent. I've never had a bike with this sensitive of a derailleur hanger. This is so frustrating because the rest of the bike is so durable and amazing.